We placed the bottom spar bracket into position (above), and using several clamps to ensure the lower skin was held in place in the the wing jig (metal fixture for wing construction), we then put...

We placed the bottom spar bracket into position (above), and using several clamps to ensure the lower skin was held in place in the the wing jig (metal fixture for wing construction), we then put...
After finishing the left wing, progress on the right wing has been going well. The skins were fitted to the jig, and then checked against the molds for correct trimming of the edges. We made...
Big week last week! The left wing was completed, and this is how it went: We mounted the completed flap on the main wing, and double checked that the movement was still within spec. Then we took off...
Big week last week! The left wing was completed, and this is how it went: We mounted the completed flap on the main wing, and double checked that the movement was still within spec. Then we took off...
We finally were able to finish bonding up the flap completely, now that the middle hinge was confirmed as to location and mounted. It didn't take long to mix up the Hysol two-part adhesive, and...
Next step on wing closeout was the fitting and bonding in of the wing root rib. The shot above is from the wing tip side looking down at the root area of the wing (next to the body), with the carbon...
We continued assembly of the wing fixture or jig, which holds the wing parts in position while the wing is bonded and bolted together. Checking accuracy took some time, as we want the jig to be...
Next step on wing closeout was the fitting and bonding in of the wing root rib. The shot above is from the wing tip side looking down at the root area of the wing (next to the body), with the carbon...