3D PRINTED PARTS – September 27, 2018 With the world turning to 3D printing for so many things, it seemed natural for us to incorporate that somewhere in the Switchblade Flying Sports Car. We will...
“GENTLEMEN, START YOUR ENGINES!” – July 7, 2018 The engine crew’s excellent work installing our Samson V4 190 hp engine in the GTV (Ground Test Vehicle) included wiring, testing, and connecting all...
BRAKE PADS FOR STOPPING POWER - September 19, 2018 The brake pads for the rear brakes were installed, as part of the work to be done while the rear tube frame came off the body to be finished. The...
“GENTLEMEN, START YOUR ENGINES!” – July 7, 2018 The engine crew’s excellent work installing our Samson V4 190 hp engine in the GTV (Ground Test Vehicle) included wiring, testing, and connecting all...
800 Orders Have Been Taken For This Flying Sports Car
We really hope that this flying car venture will actually get off the ground.
FABRICATING THE JIG FOR OUR STEEL TUBE FRAME & THE TUBE FRAME ITSELF - JULY 6, 2018 Kevin Risse of Risse Racing is cutting a piece of angle aluminum while Sam Bousfield steadies the other end....
SAVING WEIGHT – September 14, 2018 One of the things we like best is to find ways to save weight. It really makes our day! In this case, electrical engineer Ryan Dillon found small DC motors and...
THE REAR DUCT PART THAT HOUSES THE PROP - July 5, 2018 The engineering drawing above shows 2 different views of the Switchblade rear ducted area, where the propeller is located. This gives a very...