The torsion bar front suspension has been assembled and integrated with the steering, brake and wheel for the front assembly. With some minor tweaks it will be ready for mounting in the ground test...
The wind tunnel model is almost complete! One of our team members Ron Birch is shown sanding down the white oak test model. Here is Ron starting to paint the model a very nice pearl color! After...
Our wind tunnel model is coming along, with one of the aluminum wings shown above. This is a nearly finished surface, with an unfinished surface shown below. The wind tunnel model is being done as a...
The new front wheel spindle and hub were majorly completed, as were the rear hubs that allow us to use a variety of aftermarket wheels. The wing hinge assembly is narrowed down to two alternates,...
The radiator ducting and sizing was worked out this last week, along with the ordering of a V-4 engine. We will use this initial 1.7L engine to work out any harmonic problems on the ground prior to...
I mentioned our fabricating a steering box for the front of the vehicle. This is pictured below so you can see what it looks like. This is a prototype part, and as we move into production it will...
We established more of the drive train, or the parts that make the vehicle drive on the ground. The one pictured below is a differential, which splits the power from the engine out to each rear...
This week so far we have assembled the rear wheel carriers, brakes and hub. The custom steering box is being fabricated to provide a strong steering mechanism for the single front wheel. Typical two...