Update – December 1, 2020

GETTING READY FOR THE DROP – December 1, 2020


The rear suspension assembly is being established in the drop test fixture. Sean Bliss is shown bolting on the test mount with the rear suspension and brake assembly, assisted by Ronald Forseth (standing on the opposite side of the fixture). When this is completed, we will bolt on the wheel and tire and start the drop test sequence per FAA standards. There are three tests to be done, each at different heights. This is mostly to test the new shock absorbers, but the whole assembly is tested as a unit so it all will go through this rather brutal test sequence.
 
Contact Us

Switchblade, Samson Sky, Skybrid, and Skybrid Technology are trademarks or registered marks, and are used with permission on these pages.

Get The eNewsletter

Stay Informed And Up-To-Date

Skip to content